1) Use network cable connect the terminal LAN IN with computer internet access or interchanger
connection. Open the computer "IP software " folder, select run "to run the server" program. Then
choose run "configuration IP address" program, IN the pop-up dialog window, click the "query"
button (figure 1), can query the terminal current IP address (figure 2), as shown in the figure below:
5. OPERATION
7
When the system configuration requirement, it needs to modify current terminal IP address, can be
manually directly change the dialogue window "IP address" item or directly press "next" button (on the
basis of the current existing IP a ascending order) as shown in figure 3. After set up the relevant
parameters, click on "write" button, then press the "PING" button, check the IP address of the new
modified with terminal server if it is connected, the pop-up window (figure 4), it proves the new modified
IP address terminal is connected with server, close configuration "IP address" program window, complete
the terminal IP address modification operations.
Figure 1
Figure 2
Figure 3
Figure 4
WWW.GIGAMEDIA.NET
