7
GGM AXA1
- Series access control
User Manual
EN
9.
Anti Tamper Alarm
The unit uses a LDR (light dependent resistor) as an anti tamper alarm.
If the keypad is removed from the cover then the tamper alarm will operate.
10.
Sound and Light indication
11.
Detailed Programming Guide
11.1 User
Settings
To enter the programming mode
*
Master code
#
999999 is the default factory master code
To exit from the programming mode
*
Note that to undertake the following programming the master user must be logged in
To change the master code
0
New code
#
New code
#
The master code can be 6 to 8 digits long
Setting the working mode:
Set valid card only users
3
0
#
Entry is by card only
Set valid card and PIN users
3
1
#
Entry is by card and PIN together
Set valid card or PIN users
3
2
#
Entry is by either card or PIN (default)
To add a user in either card or PIN mode,
i.e. in the
3
2
#
mode. (Default setting)
Operation Status
Red Light
Green Light
Yellow Light
Buzzer
Power on
-
Bright
-
Di
Stand by
Bright
-
-
-
Press keypad
-
-
-
Di
Operation successful
-
Bright
-
Di
Operation failed
-
-
-
DiDiDi
Enter into programming mode
Bright
-
-
In the programming mode
-
-
Bright
Di
Exit from the programming mode
Bright
-
-
Di
Open the door
-
Bright
-
Di
Alarm
Bright
-
-
Alarm
