WWW.GIGAMEDIA.NET
Y O U R C O N TA C T
RECOMMENDATIONS
FOR USE
• Do not remove the protective plastic deposited
on the polycarbonate bubble until the end of
the installation.
• Fingerprints, scratches may deviate infrared
and create a reflection.
• Be careful on this point.
If you notice in the exploitation of images of
white spots around the image mean there is
an infrared reflection.
H
a specific spring loaded seal isolates the
target disc from infrared LEDs
DURING THE INSTALLATION
VERIFYING THE INCLINATION OF THE CAMERA
IN USE
ANTI-REFLEXION RUBBER
SMOKED OPAQUE DOME
Equipped with a smoked dome that reduces the infrared
reflection on the polycarbonate glass in night mode.
INFRARED REFLECTION
= BAD IMAGE
TO AVOID THESE PROBLEMS:
Smart IR anti-saturation intelligent technology
bring for closer objects the possibility to control
the IR (increase or decrease IR lighting)
to provide the sharp picture without saturation
of the image.
Do not adjust the lens of the camera in a
position too high.
INFRARED REFLECTION WITHOUT
= GOOD IMAGE
ASSET OF GGM CCDV6I3VWOK TO AVOID INFRARED REFLECTION
OSD Settings
SMART IR settings
Video Test
(to video tester
ex. GGM CCTM5)
IN CASE OF
INFRARED REFLECTION
ON THE DOME:
90 DEGREES ANGLE
RISK OF INFRARED
REFLECTION
80 DEGREES ANGLE
DISC LEDS DOES
NOT LIGHT
WITHIN THE HOUSING
spring system
