the network via
WLAN-G Configuration Tool
. For more details about the program,
please refer to the next chapter --
WLAN-G Configuration Tool Basics
.
2.2 Verifying a Successful Installation
To confirm that your 802.11b/g WLAN Cardbus is properly installed, please go along with the
procedures below.
1. Right-click the
My Computer
desktop icon and choose
Properties
from its menu.
2. In the
System Properties
dialog box, choose
Device Manager
if you are under Windows
98 or ME. If you are operating Windows 2000 or XP, click the
Hardware
tab, and then
choose the
Device Manager
button.
3. In the opened window, expand
Network adapters
to find the input device –
WLAN-G
FRISBEE Wireless LAN 802.11b/g Adapter
. Right-click over the item and choose
Properties
.
4. From the opened dialog box, on the
General
tab, find the descriptions under the
Device
Status
pane to learn if the card is working properly. However, if there’s an error message
shown, please choose
Uninstall
from the opened menu while right-clicking over the
Cardbus item, to which a red or yellow icon is attached beside, in the
Device Manager
dialog box. Then restart your system and go through the installation procedures again.
The following picture indicates a successful installation of the 802.11b/g WLAN Cardbus.
Figure 2-7: The
Device Manager
Dialog Box
