Gigafast EZ800-S, Руководство пользователя

Страница: 13 / 15

2. You should then see several tabs on one dialog. One of those tabs will
3. Be certain that all the computers have the same workgroup name
: Does the EZ-800s have the ‘auto uplink’ ability? If so, which port?
: Our EZ-800s all have auto uplink and any port supports it.
: No, the EZ-800s does not have a user interface because there is no need for
lied under the Operating System itself.
n
r network
estart the computer to take effect.
ub or some type of device?
ss-over cable is not needed due to the auto-uplink ability on the EZ-800s
allow you to change the workgroup name on that particular computer
Q
A
Q: Does the EZ-800s have a user interface like a router?
A
a user to configure an EZ-800s to have a LAN/WAN based connection. All the
changes should be app
Q: I have a router and the EZ-800s can I expand my network with
those two devices?
A: Your router should have an uplink port somewhere. Connect that port with a
Ethernet cable and into a port on the EZ-800s and that will expand you
Q: I have an older Ethernet card and upon installation the link light
on the EZ-800s flashes every second or so, what is wrong?
A: It indicates that your network card is running 100mb Full Duplex. Change the
TX rate to 10mb Half Duplex and r
Q: Is a cross-over cable needed to connect the EZ-800s to another
h
A: A cro