background image

 

 

User Guide 

GD32L233C-START 

16/16 

 

 

 

 

 

 

 

 

Important  Notice 

This document is the property of GigaDevice Semiconductor Inc. and its subsidiaries (the "Company"). This document, including any 

product of the Company described in this document (the “Product”), is owned by the Company under the intellectual property laws and 

treaties of the People’s Republic of China and other jurisdictions worldwide. The Company reserves all rights under such laws and 

treaties and does not grant any license under its patents, copyrights, trademarks, or other intellectual property rights. The  names and 

brands of third party referred thereto (if any) are the property of their respective owner and referred to for identification purposes only. 

The Company makes no warranty of any kind, express  or  implied, with regard to this document or any Product, including, but not 

limited to, the implied warranties of merchantability and fitness for a particular purpose. The Company does not assume any liability 

arising out of the application or use of any Product described in this document. Any information provided in this document is provided 

only for reference purposes. It is  the responsibility of the user of this document to properly design, program, and test the fu nctionality 

and safety of any application made of this information and any resulting product. Except for customized products which  has been 

expressly  identified in the applicable agreement, the Products are designed, developed, and/or manufactured for ordinary busi ness, 

industrial, personal, and/or household applications only. The Products are not designed, intended, or authorized for use as components 

in  systems  designed or  intended for  the  operation of weapons,  weapons  systems,  nuclear installations, atomic energy control 

instruments, combustion control instruments, airplane or spaceship instruments, transportation instruments, traff ic signal instruments, 

life-support devices or systems,  other medical devices or systems  (including resuscitation equipment and surgical implants), pollution 

control or hazardous substances  management, or other uses  where the failure of the device or Produ ct could cause personal injury, 

death, property or environmental damage ("Unintended Uses"). Customers  shall take any and all actions to ensure using and sel ling 

the Products in accordance with the applicable laws and regulations. The Company is not liable , in whole or in part, and customers 

shall and hereby do release the Company as well as it’s suppliers and/or distributors from any claim, damage, or other liability arising 

from or related to all Unintended Uses  of the Products. Customers shall indemnify and hold the Company as well as it’s suppliers 

and/or distributors harmless from and against all claims, costs, damages, and other liabilities, including claims for persona l injury or 

death, arising from or related to any Unintended Uses of the Products. 

Information in this document is provided solely in connection with the Products. The Company reserves the right to make changes, 

corrections, modifications or improvements to this document and Products and services described herein at any time, without notice. 

 

© 2021 GigaDevice 

– All rights reserved

 

 

 

Содержание GD32L233C-START


















Отзывы: