Gigabyte W480 VISION W страница 7 Скачать руководство пользователя

Страница: 7 / 60

1-2 Product Specifications

CPU

LGA1200 package:

- Intel

Xeon

W series processors

10th Generation Intel

Core

™

processors/Intel

Pentium

processors/

Intel

Celeron

processors

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset

Intel

W480 Express Chipset

Memory

Intel

Xeon

W-1290/W-1270 series processors/Intel

Core

™

i9/i7 processors:

- Support for DDR4 2933/2666/2400/2133 MHz

Intel

Xeon

W-1250 series processors/Intel

Core

™

i5/i3/Pentium

/Celeron

processors:

- Support for DDR4 2666/2400/2133 MHz

4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity)

of system memory

Dual channel memory architecture

Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules

* To support ECC, you must install an Intel

Xeon

processor.

Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

Support for Extreme Memory Pro

le (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics

Integrated Graphics Processor-Intel

HD Graphics support:

- 1 x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz

* Support for HDMI 1.4 version and HDCP 2.3.

- 2 x DisplayPorts, supporting a maximum resolution of 4096x2304@60 Hz

* Support for DisplayPort 1.4 version, HDCP 2.3, and HDR.

Support for up to 3 displays at the same time

Maximum shared memory of 512 MB

Audio

Realtek

ALC1220-VB codec

* The back panel line out jack supports DSD audio.

High De

nition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN

Intel

2.5GbE LAN chip (2.5 Gbit/1 Gbit/100 Mbit)(LAN2)

Intel

GbE LAN chip (1 Gbit/100 Mbit)(LAN1)

Expansion Slots

1 x PCI Express x16 slot, running at x16 (PCIEX16)

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

1 x PCI Express x16 slot, running at x8 (PCIEX8)

* The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is

populated, the PCIEX16 slot operates at up to x8 mode.

2 x PCI Express x16 slots, running at x4 (PCIEX4_1, PCIEX4_2)

* The PCIEX4_2 slot shares bandwidth with the M2M_SB connector. The PCIEX4_2

slot becomes unavailable when a device is installed in the M2M_SB connector.

1 x PCI Express x1 slot

(All of the PCI Express slots conform to PCI Express 3.0 standard.)

1 x M.2 Socket 1 connector for an Intel

CNVi wireless module only (CNVI)

Multi-Graphics

Technology

Support for AMD Quad-GPU CrossFire

™

and 2-Way AMD CrossFire

™

technologies

- 7 -

Содержание W480 VISION W





























































Результаты поиска

Содержание W480 VISION W

Отзывы:

Похожие инструкции для W480 VISION W

Бренды по названию

Популярные бренды

Gigabyte W480 VISION W, Руководство пользователя

Результаты поиска

Содержание W480 VISION W

Отзывы:

Похожие инструкции для W480 VISION W

Бренды по названию

Популярные бренды