Gigabyte TRX40 AORUS PRO WIFI Скачать руководство пользователя страница 31

Страница: 31 / 48

IO Ports

Initial Display Output

Specifies the first initiation of the monitor display from the installed PCI Express graphics card.

PCIe 1 Slot

Sets the graphics card on the PCIEX16_1 slot as the first display. (Default)

PCIe 2 Slot

Sets the graphics card on the PCIEX8_1 slot as the first display.

PCIe 3 Slot

Sets the graphics card on the PCIEX16_2 slot as the first display.

PCIe 4 Slot

Sets the graphics card on the PCIEX8_2 slot as the first display.

PCIEX16_1 Bifurcation

Allows you to determine how the bandwidth of the PCIEX16_1 slot is divided. Options: Auto, x16, x4x4x4x4.

(Default: Auto)

PCIEX8_1 Bifurcation

Allows you to determine how the bandwidth of the PCIEX8_1 slot is divided. Options: Auto, x8, x4x4.
(Default: Auto)

PCIEX16_2 Bifurcation

Allows you to determine how the bandwidth of the PCIEX16_2 slot is divided. Options: Auto, x16, x4x4x4x4.

(Default: Auto)

PCIEX8_2 Bifurcation

Allows you to determine how the bandwidth of the PCIEX8_2 slot is divided. Options: Auto, x8, x4x4.
(Default: Auto)

Above 4G Decoding

Enables or disables 64-bit capable devices to be decoded in above 4 GB address space (only if your system
supports 64-bit PCI decoding). Set to

Enabled

if more than one advanced graphics card are installed and

their drivers are not able to be launched when entering the operating system (because of the limited 4 GB
memory address space). (Default: Disabled)

F_U32C Gen Speed

Allows you to set the operation mode of the F_U32C header to Gen 1 or Gen 2. (Default: Auto)

Onboard LAN Controller

Enables or disables the onboard LAN function. (Default: Enabled)

If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to

Disabled

USB Configuration

Legacy USB Support

Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)

XHCI Hand-off

Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off
support. (Default: Enabled)

USB Mass Storage Driver Support

Enables or disables support for USB storage devices. (Default: Enabled)

Port 60/64 Emulation

Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support
for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices.
(Default: Disabled)

- 31 -

Содержание TRX40 AORUS PRO WIFI

















































Результаты поиска

Содержание TRX40 AORUS PRO WIFI

Отзывы:

Похожие инструкции для TRX40 AORUS PRO WIFI

Бренды по названию

Популярные бренды

Gigabyte TRX40 AORUS PRO WIFI, Руководство пользователя

Результаты поиска

Содержание TRX40 AORUS PRO WIFI

Отзывы:

Похожие инструкции для TRX40 AORUS PRO WIFI

Бренды по названию

Популярные бренды