Gigabyte T1028 Скачать руководство пользователя

Страница: 1 / 54

T1028(M1028) Touch Note User's Manual

Original Issue: 2009/03/27

This manual guides you in setting up and using your new Netbook PC. Information in the manual has been carefully checked for accu-

racy and is subject to change without notice.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mecha-

nical, photocopy, recording, or otherwise, without prior written consent.

Trademarks

Product names used herein are for identification purposes only and may be the trademarks of their respective companies.

Microsoft

, MS-DOS, Windows

, and Windows

Sound System are trademarks of Microsoft Corporation.

Intel

, Atom™ is registered trademarks of Intel Corporation.

Sound Blaster, Sound Blaster Pro are trademarks of Creative Technology.

All other brands or product names mentioned in this manual are trademarks or registered trademarks of their respective companies.

Содержание T1028























































Результаты поиска

Содержание T1028

Отзывы:

Похожие инструкции для T1028

Бренды по названию

Популярные бренды

Gigabyte T1028, Руководство пользователя

Результаты поиска

Содержание T1028

Отзывы:

Похожие инструкции для T1028

Бренды по названию

Популярные бренды