Gigabyte S17 Series, Руководство пользователя

Страница: 7 / 8

S17 Series User's Manual
7
English
Make sure the direction of the foolproof groove must be the same as that of the
memory slot on the motherboard.
There are fixing grooves on both sides
DDR
Fixing the hooks. The hooks must be fixed into the grooves
before the installation is considered complete.
6. Connect the IDE bus cable bundled in the accessory kit. Connect the black connector to the
hard disk drive and align the first pin of the red cable to Pin 1 labeled on the hard disk.
7. Connect the connector of the power supply to the power supply socket of the hard disk drive.
Put the Device Disk Bay
into the chassis.
Location the HDD Cable into the
Cable hook.
Alightle 3 screws at the screw
holes.