BSMI Notice (Taiwan Only)
●
The symbol above must be attached to the product indicating compliance with the BSMI standard.
●
Most Slat PC are classified by the Bureau of Standards, Meteorology and Inspection (BSMI) as Class B
information technology equipment (ITE).
●
Caution: Suggest to operate under 40˚C
CCC (China only)
●
On Class A systems, the following warning will appear near the regulation label:
●
Warning: This is a Class A product. In a domestic environment, this product may cause radio interference,
in which case users may be required to take adequate measures.
Federal Communications Commission Notice :
This equipment has been tested and found to comply with the limits for a Class B digital service,
pursuantto Part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmfulinterference in a residential installation. Any changes or modifications made to this equipment
mayvoid the user’s authority to operate this equipment. This equipment generates, uses, and can radiateradio
frequency energy, and if not installed and used in accordance with the instructions, may causeharmful
interference to radio communications. However, there is no guarantee that interference will notoccur in a
particular installation. If this equipment does cause harmful interference to radio or televisionreception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
●
Reorient or relocate the receiving antenna.
●
Increase the separation between the equipment and receiver.
●
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
●
Consult the dealer or an experienced radio/TV technician for help.
●
All external cables connecting to this basic unit must be shielded.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Note: The user that change or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
