background image

Server Warnings and Cautions

Before installing a server, be sure that you understand the following warnings and cautions.

 WARNING! 

To reduce the risk of electric shock or damage to the equipment:

• 

Do not disable the power cord grounding plug. The grounding plug is an important safety 

feature.

• 

Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all 

times.

• 

Unplug the power cord from the power supply to disconnect power to the equipment.

• 

Do not route the power cord where it can be walked on or pinched by items placed against it. 

Pay particular attention to the plug, electrical outlet, and the point where the cord extends from 

the server.

 WARNING! 

To reduce the risk of personal injury from hot surfaces, allow the drives 

and the internal system components to cool before touching them.

 

WARNING! 

This server is equipped with high speed fans. Keep away from hazardous 

moving fan blades during servicing.

 

WARNING! 

This equipment is not suitable for use in locations where children are 

likely to be present.

 CAUTION! 

• 

Do not operate the server for long periods with the access panel open or removed. Operat-

ing the server in this manner results in improper airflow and improper cooling that can lead to 

thermal damage.

• 

Danger of explosion if battery is incorrectly replaced.

• 

Replace only with the same or equivalent type recommended by the manufacturer.

• 

Dispose of used batteries according to the manufacturer’s instructions.

Содержание R272-Z30






































































































































Отзывы: