manualshive.com logo in svg

Gigabyte R183-Z91, Руководство пользователя, Страница: 122 / 165

Поделиться
Скачать
Gigabyte R183-Z91 Скачать руководство пользователя страница 122

BIOS Setup

- 122 -

Parameter

Description

NBIO Common Options

IOMMU

Enable/Disable the IOMMU function.
Options available: Disabled, Enabled. Default setting is 

Enabled

.

DMAr Support

Enable/Disable DMAr system protection during POST.
Options available: Disabled, Enabled, Auto. Default setting is 

Auto

.

DMA Protection

Enable/Disable DMA remap support in IVRS IVinfo Field.
Options available: Auto, Enabled, Disabled. Default setting is 

Auto

.

DRTM Virtual Device 
Support

Enable/Disable DRTM ACPI virtual device.
Options available: Disabled, Enabled, Auto. Default setting is 

Auto

.

DRTM Memory 
Reservation

Enable/Disable DRTM Memory reservation.
Options available: Disabled, Enabled, Auto. Default setting is 

Auto

.

ACS Enable

Enable/Disable ACS.
Options available: Enable, Disabled, Auto. Default setting is 

Auto

.

PCIe ARI Support

Enable/Disable Alternative Routing-ID Interpretation.
Options available: Disable, Enable, Auto. Default setting is 

Auto

.

PCIe ARI Enumeration

ARI Forwarding Enable for each downstream port.
Options available: Disable, Enable, Auto. Default setting is 

Auto

.

PCIe Ten Bit Tag Support

Enable/Disable PCIe ten bit tags for supported devices. (Auto=Disabled)
Options available: Disable, Enable, Auto. Default setting is 

Auto

.

SMU Common Options

Press [Enter] for configuration of advanced items.

NBIO RAS Common 
Options

Press [Enter] for configuration of advanced items.

Enable AER Cap

Enable/Disable Advanced Error Reporting Capability.
Options available: Enable, Disabled, Auto. Default setting is 

Auto

.

Early Link Speed

Configures Early Link Speed.

Options available: Auto, Gen1, Gen2. Default setting is 

Auto

.

Hot Plug Handling mode

Controls the Hot Plug Handling mode.
Options available: OS First, Firmware First/EDR if OS supports, Firmware 
First but allow OS First, System Firmware Intermediary, Auto. Default setting 
is 

Auto

.

Hot Plug Allow FF in 
Synchronous

Allows firmware first hot plug handling mode to operate in mode A and mode 

B synchronous mappings.
Options available: Disabled, Enabled. Default setting is 

Disabled

.

Presence Detect Select 
mode

Controls the Presence Detect Select mode.
Options available: OR, AND, Auto. Default setting is 

Auto

.

Содержание R183-Z91






































































































































































Отзывы:

Нет отзывов