BIOS Setup
- 70 -
2-3-7
PCH Configuration
Parameter
Description
PCH Configuration
PCH SATA Configuration
Press [Enter] to configure advanced items.
SATA Controller
– Enable/Disable SATA controller.
– Options available: Enable, Disable. Default setting is
Enable
.
Configure SATA as
–
Configures on chip SATA type.
– AHCI Mode: When set to AHCI, the SATA controller enables its AHCI
functionality. Then the RAID function is disabled and cannot be
access the RAID setup utility at boot time.
– RAID Mode: When set to RAID, the SATA controller enables both its
RAID and AHCI functions. You will be allowed to access the RAID
setup utility at boot time.
– Options available: AHCI, RAID. Default setting is
AHCI
.
Alternate Device ID on RAID
(Note 1)
– Enable/Disable Alternate Device ID on RAID mode.
– Options available: Enable, Disable. Default setting is
Disable
.
SATA Port 0/1/2/3/4/5/6/7
–
The category identifies SATA hard drives that are installed in the
computer. System will automatically detect HDD type.
(Note 1) Only appears when HDD sets to
RAID
Mode.
Содержание MD72-HB0
