H971-RH User’s Manual -Page 19
Chapter
Basic Installation
►
Power Up
◄
Press the system power button ( ) to turn H971-RH on.
When you turn H971-RH on, “WELCOME” is shown on the VFD (see diagram
below).
If your RF keyboard linkage has not been set, please follow the steps shown below:
1. Check if the batteries have been installed.
2. Press connect button on the front. Then press the learning button on the back of
the keyboard to let receiver recognize signal. (Please refer to Page18)
3. Please check keyboard operating within a radius of about 10 meters without
interference.
