Gigabyte H310M M.2 2.0 Скачать руководство пользователя страница 10

1-5  Installing an Expansion Card

Read the following guidelines before you begin to install an expansion card:

 

Make sure the motherboard supports the expansion card. Carefully read the manual that came 

with your expansion card.

 

Always turn off the computer and unplug the power cord from the power outlet before installing an 

expansion card to prevent hardware damage.

Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.

1.  Dual Channel mode cannot be enabled if only one memory module is installed.

2.  When enabling Dual Channel mode with two memory modules, it is recommended that memory of 

the same capacity, brand, speed, and chips be used.

Dual Channel Memory Configuration

This motherboard provides two memory sockets and supports Dual Channel Technology. After the memory 

is installed, the BIOS will automatically detect the specifications and capacity of the memory. Enabling Dual 

Channel memory mode will double the original memory bandwidth.

The two DDR4 memory sockets are divided into two channels and each channel has one memory socket as 

following:

 

Channel A: DDR4_1

 

Channel B: DDR4_2

1-6  Back Panel Connectors

USB 2.0/1.1 Port

The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices.

PS/2 Keyboard/Mouse Port

Use this port to connect a PS/2 mouse or keyboard.

D-Sub Port

The D-Sub port supports a 15-pin D-Sub connector and supports a maximum resolution of 1920x1200@60 Hz 

(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports 

D-Sub connection to this port.

HDMI Port

The HDMI port supports HDCP 2.2 and Dolby TrueHD and DTS HD Master 

Audio formats. It also supports up to 192KHz/16bit 8-channel LPCM audio 

output. You can use this port to connect your HDMI-supported monitor. The maximum supported 

resolution is 4096x2160@30 Hz, but the actual resolutions supported are dependent on the monitor 

being used.

After installing the HDMI device, make sure to set the default sound playback device to HDMI. (The 

item name may differ depending on your operating system.)

- 10 -

Содержание H310M M.2 2.0









































Отзывы: