`
Channel A/B Memory Sub Timings
This sub-menu provides memory timing settings for each channel of memory. The respective timing setting
screens are configurable only when
Memory Timing Mode
is set to
Manual
or
Advanced Manual
. Note:
Your system may become unstable or fail to boot after you make changes on the memory timings. If this
occurs, please reset the board to default values by loading optimized defaults or clearing the CMOS values.
`
Advanced Voltage Settings
`
Advanced Power Settings
&
CPU Vcore Loadline Calibration
Allows you to configure Load-Line Calibration for the CPU Vcore voltage. Selecting a higher level keeps
the CPU Vcore voltage more consistent with what is set in BIOS under heavy load.
Auto
lets the BIOS
automatically configure this setting and sets the voltage following Intel's specifications. (Default: Auto)
`
CPU Core Voltage Control
This section provides CPU voltage control options.
`
DRAM Voltage Control
This section provides memory voltage control options.
`
Internal VR Control
This section provides VR voltage control options.
`
PC Health Status
&
Reset Case Open Status
Disabled
Keeps or clears the record of previous chassis intrusion status. (Default)
Enabled
Clears the record of previous chassis intrusion status and the
Case Open
field will
show "No" at next boot.
&
Case Open
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To
clear the chassis intrusion status record, set
Reset Case Open Status
to
Enabled
, save the settings to
the CMOS, and then restart your system.
&
CPU Vcore/CPU VCCSA/DRAM Channel A/B V3.3V/+5V/+12V/CPU VAXG
Displays the current system voltages.
`
Miscellaneous Settings
&
Max Link Speed
Allows you to set the operation mode of the PCI Express slots to Gen 1, Gen 2, or Gen 3. Actual operation
mode is subject to the hardware specification of each slot.
Auto
lets the BIOS automatically configure this
setting. (Default: Auto)
&
3DMark01 Enhancement
Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled)
`
Smart Fan 5 Settings
&
Monitor
Allows you to select a target to monitor and to make further adjustment. (Default: CPU)
- 25 -
