Gigabyte H273-Z80-AAN1, Руководство пользователя

Страница: 32 / 166

- 32 -
System Hardware Installation
To install the heatsink, reverse the steps above while ensuring that you tighten the captive screws in
sequential order (1
g
2
g
3
g
4
g
5
g
6) as seen in the image below.
CPU0 Heatsink CPU1 Heatsink:
• Lock the CPU by using a Torx T20 screwdriver to tighten screw.
• When installing the heatsink to CPU, use a Torx T20 screwdriver to tighten 6 captive nuts in
sequence as 1-6.
• The screw tightening torque: 13.5 ± 0.5 kgf-cm.
• To ensure the system operates properly, make sure the heatsink is seated on the processor
firmly.
66
22
44
55
33
11
66
22
44
55
33
11