Gigabyte H262-P61, Руководство пользователя

Страница: 74 / 100

BIOS Setup
- 74 -
Parameter
Description
iSCSI General Parameters
(continued)
Š
Use TCP Timestamp
– Enable/Disable the TCP timestamp.
– Options available: Enabled, Disabled. Default setting is Disabled .
Š
Target as First HDD
– Enable/Disable target appears as first hard disk drive (HDD) in the
system.
– Options available: Enabled, Disabled. Default setting is Disabled .
Š
LUN Busy Retry Count
– Configures the number of retries in 2 second intervals when LUN is
busy (0-60).
– Default setting is 0 .
Š
IP Version
– Displays the IP version supported. Modifying this parameter will reset
all IP-related fields.
– Options available: IPv4, IPv6. Disabled. Default setting is IPv4 .
iSCSI Initiator Parameters
Press [Enter] to configure advanced items.
Š
IP Address
– Configures the initiator IP address.
Š
Subnet Mask
– Configures the IP subnet mask.
Š
Default Gateway
– Configures the default gateway IP address.
Š
Primary DNS
– Configures the primary DNS IP address.
Š
Secondary DNS
– Configures the secondary DNS IP address.
Š
iSCSI Name
– Configures the iSCSI name.
Š
CHAP ID
– Configures the Challenge-Handshake Authentication Protocol
(CHAP) ID (up to 128 characters in length).
Š
CHAP Secret
– Configure the Challenge-Handshake Authentication Protocol
(CHAP) Secret (12 to 16 characters in length).
iSCSI First/Second Target
Parameters
Press [Enter] to configure advanced items.
Š
Connect
– Enable/Disable the target establishment.
– Options available: Enabled, Disabled. Default setting is Disabled .
Š
IP Address
– Configures the Target IP address.
Š
TCP Port
– Configures the Target TCP port number (1-65535).