Gigabyte GX5, Инструкция по эксплуатации, Страница: 27 / 59

27
Profile” and “Memory Status”.
‹ Send Settings: you may modify this setting before sending each MMS.
z “Valid Period”
System will try to continuously send failed message within valid period.
You may choose “1 Hr”, “12 Hrs”, “1 Day”, “1Week”, and “Max”. The
default value is "Maxi” and the length of time is varied depending on
system provider.
z “Delivery Report”
You may set whether or not to automatically send MMS message to you
by system after you sending MMS message.
The default of said sending result of MMS message sending is “Off”
z “Read Report”
You may set whether or not to receive read report after the recipient has
read it, the default is “Off”.
z “Priority”
This item allows you to set the priority of sending said message.
There are “High”, “Normal” and “Low” available for selection and default
as “Normal”.
z “Slide Timing”
The interval seconds play between MMS pages, which is between 1~60
seconds.
z “Delay Delivery”
To schedule the length of time before sending, which default as
“ Immediate”.
‹
Receive Settings
In general, the related settings for MMS receiving are unnecessarily to
modify, including “Main Network”, “Roaming Network”, “Read Report” and
“Delivery Report”.
。
‹ Filters
z
From Anon.: change the receiving switch of incoming message sent
by anonymous sender, which default as “Allow”.
z Maximum Receive Cap.: the default is 50k.
z Adv.Message: set the receiving ways of advertising message, which
default as “Allow”.
‹
Edit Profile: for details, see “Internet”
Æ
”Network Settings”
Æ
”Connection
Settings”
‹ Memory Status: view the used and unused status of MMS memory.