Gigabyte GV-R80128D, Руководство пользователя

Страница: 11 / 38

Hardware Installation - 7 -
English
5. Replace the screw to fasten the card in place,
and replace the computer cover.
6. Plug the display cable into your graphics
card; then turn on the computer and monitor.
You are now ready to proceed with the installation of the graphics card drivers. Please refer
to next chapter for detailed instructions.
To Flat Panel Display
7-Pin for TV-out only
To VGA Monitor
Warning!
When installing the graphics card, do
not push down the heat pipe. This
may displace the heat pipe and cause
bad contact between the VPU and
thermal pad as well as affect the heat
dissipation. To avoid system
instability, do not touch the graphics
card when it is runnnig .
4. Locate the AGP slot. If necessary, remove
the metal cover from this slot; then align your
graphics card with the AGP slot, and press
it in firmly until the card is fully seated.