Gigabyte GV-N66L128DP, Руководство пользователя

Страница: 9 / 34

Hardware Installation - 7 -
English
To install your new graphics card:
1. Locate the AGP slot. If necessary, remove
the metal cover from this slot; then align your
graphics card with the AGP slot, and press it
in firmly until the card is fully seated.
2. Replace the screw to fasten the card in place,
and replace the computer cover.
3. Plug the display cable into your card; then
turn on the computer and monitor. If your
graphics card came with a DVI-I connector,
you can connect a flat panel display to the
appropriate connector, as shown below...
You are now ready to proceed with the installation of the graphics card driver. Please
refer to next chapter for detailed instructions.
To VGA Monitor
To TV / VCR
To Flat Panel Display
After installation, please connect the power cable to your
GV-N66L128DP graphics card, or the system will not boot.
Please do not touch the graphics card when it is runnnig to
avoid the system unstable problems.