manualshive.com logo in svg

Gigabyte GS-R12P4S, Руководство по обслуживанию, Страница: 65 / 71

Поделиться
Скачать
Gigabyte GS-R12P4S Скачать руководство пользователя страница 65

- 66 -

BIOS Setup

5-6  Boot Option Menu

The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error 

message if the legacy drive(s) specified is not bootable. 

By default, the server searches for boot devices in the following secquence: 

 

1.  UEFI device.   
2. 

Hard drive. 

  

Bootup NumLock State

    

 

Enable or Disable Bootup NumLock function.

 

Options available: On/Off. Default setting is 

On

.

  

Quiet Boot 

  

 

Enables or disables showing the logo during POST.

 

Options available: Enabled/Disabled. Default setting is 

Disabled

.

  

Interrupt 19 Capture 

  

 

Interrupt 19 is the software interrupt that handles the boot disk function. When enabled, this BIOS fea

-

ture allows the ROM BIOS of those host adaptors to "capture" Interrupt 19 during the boot process so 
that drives attached to these adaptors can function as bootable disks.

 

Options available: Enabled/Disabled. Default setting is 

Enabled

.

Содержание GS-R12P4S








































































Отзывы:

Нет отзывов