manualshive.com logo in svg

Gigabyte GS-R114V, Руководство по установке системы

Поделиться
Скачать
Gigabyte GS-R114V Скачать руководство пользователя страница 8

8

GS-R114V Rack Mount Server

;

Chassis

;

GA-4MPSV Motherboard (Installed)

;

Power Supply (Installed)

;

GSMT User’s Manual

;

FAN Duct x 1

;

CPU Heat Sink x 1

;

Standard Floppy Drive (Installed)

;

Silm type CD-ROM drive (Installed)

;

Cables (RJ45)

;

GS-R114V System Installation Guide

;

Case Handle Kit x 2

;

Driver CD for motherboard driver & utility

Introduction

Welcome to Gigabyte GS-R114L Rack mount Server System Installation Guide. The guide

provides instructions for configuration hardware for the GS-R114L your system.

This installation guide will assist you in installing all the essential components for the sever system.

For your protection, please read and undertand all of the safety and operating instructions regarding your
Gigabyte Server and retain for future reference. The procedures in this guidebook assume that your are
a system or network administrator experienced in installing similar hardware.

Contents Packages

When opening the package, please ensure  the system components are not damaged during the shipping.
Using the following checklist to verify the contents. If any component is missing or damaged in the
system, please contact your vendor immediately.

Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To
protect them against damage from static electricity, you should follow some precautions whenever you
work on your computer.

1.

Unplug your computer when working on the inside.

2.

Use a grounded wrist strap before handling computer components. If you do not have
one, touch both of your hands to a safely grounded object or to a metal object, such as
 the power supply case.

3.

Hold components by the edges and try not touch the IC chips, leads or connectors, or
other components.

4.

Place components on a grounded antistatic pad or on the bag that came with the
components whenever the components are separated from the system.

5.

Ensure that the ATX power supply is switched off before you plug in or remove the ATX
power connector on the motherboard.

WARNING!

Содержание GS-R114V




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды