Gigabyte GS-R114L Скачать руководство пользователя страница 52

Страница: 52 / 67

5 2

GS-R114L Rack Mount Server

Post Error Pause

If this item is set to enabled, the system will wai for user intervention on critical POST errors. If
this item is disabled, the system will boot with no intervention if possible.

Enabled

Enable Post Error Pause.

(Default value)

Disabled

Disable this function.

AC-LINK

This option provides user to set the mode of operation if an AC / power loss occurs.

Power On

System power state when AC cord is re-plugged.

Stay Off

Do not power on system when AC power is back.

Last State

Set system to the last sate when AC power is removed. Do not power on
system when AC power is back. (Default value)

Mini BMC Function

Enabled

Enable Mini BMC function. (Default value)

Disabled

Disable this function.

This option will disappear and disable when BMC module is populated.

Mini BMC SEL View

Press [Enter] to view the Mini BMC SEL.

This option will disappear and disable when BMC module is populated.

Log POST System Event

Enabled

Enable Log POST System Event. (Default value)

Disabled

Disable this function.

Event Log Viewer

Enabled

Enable Event Log Viewer function(Default value)

Disabled

Disable this function.

This option will disappear and disable when BMC module is populated.

Содержание GS-R114L




































































Результаты поиска

Содержание GS-R114L

Отзывы:

Бренды по названию

Популярные бренды

Gigabyte GS-R114L, Руководство по установке системы

Результаты поиска

Содержание GS-R114L

Отзывы:

Бренды по названию

Популярные бренды