Gigabyte GR-ES604, Быстрое руководство по установке

Страница: 13 / 24

13
4.4. Install CPU and heat sink
Step 1. Gently lift the metal lever located on the CPU socket to the upper-right
position.
Step 2. Remove the plastic covering on the CPU socket.
Step 3 . Align the indented corner of the CPU with the triangle and
gently
insert the CPU into position. (Grasping the CPU firmly between your
thumb and forefinger, carefully place it into the socket in a straight and
downwards motion. Avoid twisting or bending motions that might
cause damage to the CPU during installation.)
Step 4. Once the CPU is properly inserted, please replace the plastic covering
and push the metal lever back into its original position.
Step 5. Apply heatsink paste on the surface of the installed CPU.
Step 6. Remove the heatsink, turning the push pin along the direction of arrow;
and reverse the previous step to install the heat sink.
Please note the direction of arrow sign on the male push pin doesn't
face inwards before installation. (This instruction is only for Intel
boxed fan)
Step 7. Place the heatsink on top the CPU and make sure the push pins align to
the pin hole on the motherboard. Push down the push pins diagonally.
Step 8. Make sure the Male and Female push pin are brought together.
Step 9. Check the back side of teh motherboard. Make sure the push pin is
seated firmly as the picture shown. Installation completed.
Step 10. Attach the power connector of the heatsink to the CPU fan header
located on the motherboard.
Step 1
Step 2