Gigabyte GN-WP01GT, Руководство пользователя

Страница: 26 / 51

Cells check box if the access point to which the client adapter is to
associate (or the VLAN to which the client will be assigned) has WEP set
to Optional and static WEP is enabled on the client adapter. Otherwise, the
client is unable to establish a connection with the access point.
Uncheck the Allow Association to Mixed Cells check box if the access point
to which the client adapter is to associate (or the VLAN to which the client
will be assigned) does not have WEP set to Optional. This is the default
setting.
None – no security is set. (Default setting)
Select the type of security encryption (WPA/WPA2, WPA/WPA2-Passphrase,
WEP or RADIUS 802.1X) from the radio buttons, and click
Configure.
Depending on the security selected, the following Configure Security Screens
will appear.
Configure Pre Shared Key (WEP) Security
To use WEP, select if you want Hex or ASCII method, enter a pre-shared key,
select 64-bits, 128-bits, or 152-bits from the drop down box and click OK.
Note: ASCII text WEP keys are not supported on GIGABYTE Routers, you
must choose the Hexadecimal (0-9,A-F) option if you are connecting with
these Access Points.
Figure 20. WEP key configuration
WPA/WPA2-Passphrase - When you select WPA/WPA2, the target
802.11 device must also be WPA/WPA2 enabled in order to
communicate with each other. Obtain the WPA/WPA2 Passphrase for
the access point from your system administrator and inter it in the
WPA/WPA2 Passphrase field.
•
WPA/WPA2 Passphrase must contain 8 to 63 ASCII text
characters or 64 hexadecimal characters.
•
Your client adapter's WPA/WPA2 Passphrase must match
26