GN-GT8S Gigabit Ethernet Smart Switch
4
Installing the Hardware
The site where you place the Switch may greatly affect its performance. When installing,
take the following into your consideration:
w
Install the switch in a fairly cool and dry place. See
Physical Specification
for the
acceptable temperature and humidity operating ranges.
w
Install the switch in a site free from strong electromagnetic field generators (such as
motors), viberation, dust and direct exposure to sunlight.
w
Leave at least 10cm (about 4 linches) of space at the front and rear of the hub for
ventilation.
w
Install the switch on the sturdy, level surface that can support its weight, or in
standard-size equipment rack.
Connecting Network Cable
The switch supports 10/100/1000Mbps Gigabit Ethernet. Each port on the switch supports
Auto-MDI/MDI-X. Auto-MDI/MDI-X is a feature that eliminates the need for worring about
using either a standard or crossover cable - you can use either one - and allows any port to
be an uplink port.
AC Power
The switch can be used with AC power supply 100-240V AC, 50~60Hz. Please connect
the power adapter into the power port of the switch and plug the other end of the power
into the electrical outlet.
