19
n
Auto Rate
In this item you can select either “enable” or “disable”. The default value is
“enable ”.
Enable: If the selection is “enable”, the transfer rate will automatically
change to the optimum rate allowed. The range of auto-change will
base on the setting of “Transmit Rate ”.
Transmit Rate setting:
11M: range is among 1M, 2M, 5,5M and 11M
5.5M: range is among 1M, 2M and 5,5M
2M: range is between 1M and 2M
1M: no auto-change. The transmit rate is fixed at 1M.
Disable: There is no transfer rate auto-change. The transfer rate will be
defined by the “Transmit Rate” column.
n
Hidden ESSID
This setting allows you to hide the ESSID in wireless transmission. Those
who don’t know the ESSID will not be able connect to the AP. The default
value is “disable”.
n
RTS Threshold
This value should remain at its default setting of 2432. Should you encounter
inconsistent data flow, only minor modifications are recommended. The
setting range is 0 ~ 3000.
n
ESSID
The ESSID or SSID is the name represent the AP in the wireless network.
The ESSID of all AP in your network should set to identical for the mobile
client can roam between access points. This ESSID string is case sensitive
of up to 32 ASCII characters.
Verify the desired setting and then click the “
Apply
”
butto n to set the value into
access point.
Содержание GN-AP101B
