GN-AP03G AirCruiser G Range Extender
Chapter 2 QUICK INSTALLATION
System Requirements
Suggested Specifications for Wireless LAN Access Point installation:
•
A PC or Macintosh Computer
•
An installed 802.11b/g wireless PCI LAN adapter
•
A 802.11b/g Wireless router or Access Point
WDS setting
The WDS function allows several of the access points to compose a wide Wireless LAN network. Please
note all APs must be set to use the same channel and the SSID of all participating APs must also be the
same
.
1. Auto
WDS
Hardware Installation
You can easy to use the WDS function by pressing the Q-Link button.
Step 1 Please confirm the Wireless LED is blinking.
Step 2 Press the Q-Link button for 2 seconds.
Step 3 At this time, the GN-AP03G will detect and connect to the GIGABYTE AP or Router
automatically. And the Q-Link LED will blink few seconds. After the connection been setup
successfully, the Q-Link LED will keep light up for 5 seconds and the turned off.
Step 4 Now you can start to use your PC or laptop to connect to the Gigabyte GN-AP03G to enjoy the
expended covering range.
4