Gigabyte GH-PDU21-SC, Руководство по установке

Страница: 9 / 22

- 9 -
GH-PDU21-SC
English
Figure 1-1
Figure 2-3
Figure 3
Figure 4
Installation Instructions for AMD K7 Clip
Figure 2-1
Figure 2-2
Figure 1
Please add an adequate layer of heat sink paste on the
surface of the CPU. Remove the bracket of the cooler along
the direction of the arrow (Figure 1-2). The bracket should
be removed as that shown in Figure 1-3.
Figure 2
Place point A of the clip (Figure2-1)on point B at the bottom
of the cooler(Figure2-2).As Figure 2-3.
Figure 3
Align the three spaces on the cooler with the three clips on
the base of the CPU and make sure point A of the clip
(Figure 2-1) is placed on point B at the bottom of the cooler
(Figure 2-2) and push down on the clip until it’s firmly
locked.
Figure 1-2 Figure 1-3
B
A
Figure 4
Connect the 3-pin connector to the CPU fan connector on the
motherboard. Clip Installation is now complete.
If fan speed control is required, please refer to "Installation
of the Fan Speed Control Cable".