Gigabyte GA-Z77X-UD3H Скачать руководство пользователя страница 11

Страница: 11 / 126

- 10 -

Hardware Installation

1-2 Product Speciications

CPU

Support for Intel

Core

™

i7 processors/Intel

Core

™

i5 processors/

Intel

Core

™

i3 processors/Intel

Pentium

processors/Intel

Celeron

processors

in the LGA1155 package

(Go to GIGABYTE's website for the latest CPU support list.)
L3 cache varies with CPU

Chipset

Intel

Z77 Express Chipset

Memory

4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory

* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical

memory is installed, the actual memory size displayed will be less than 4 GB.

Dual channel memory architecture

Support for DDR3 1600/1333/1066 MHz memory modules

Support for non-ECC memory modules

Support for Extreme Memory Proile (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory
modules.)

Onboard
Graphics

Chipset:

1 x D-Sub port

1 x DVI-D port, supporting a maximum resolution of 1920x1200

* The DVI-D port does not support D-Sub connection by adapter.

1 x HDMI port, supporting a maximum resolution of 1920x1200

1 x DisplayPort, supporting a maximum resolution of 2560x1600

Audio

VIA VT2021 codec

High Deinition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN

Atheros GbE LAN chip (10/100/1000 Mbit)

Expansion Slots

1 x PCI Express x16 slot, running at x16 (PCIEX16)

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

1 x PCI Express x16 slot, running at x8 (PCIEX8)

(The PCIEX16 and PCIEX8 slots conform to PCI Express 3.0 standard.)

* The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot

is populated, the PCIEX16 slot will operate at up to x8 mode.

* To support PCI Express 3.0, you must install an Intel 22nm (Ivy Bridge) CPU.

1 x PCI Express x16 slot, running at x4 (PCIEX4)

* The PCIEX4 slot shares bandwidth with all PCI Express x1 slots. All PCI Express x1

slots will become unavailable when a PCIe x4 expansion card is installed.

3 x PCI Express x1 slots

(The PCIEX4 and PCI Express x1 slots conform to PCI Express 2.0 standard.)
1 x PCI slot

Multi-Graphics
Technology

Support for 2-Way AMD CrossFireX

™

/NVIDIA SLI technology (PCIEX16 and PCIEX8)

* The PCIEX16 slot operates at up to x8 mode when AMD CrossFireX

™

/NVIDIA SLI

is enabled.

Содержание GA-Z77X-UD3H































































































































Результаты поиска

Содержание GA-Z77X-UD3H

Отзывы:

Gigabyte GA-Z77X-UD3H, Руководство пользователя, Страница: 11 / 126

Результаты поиска

Содержание GA-Z77X-UD3H

Отзывы: