manualshive.com logo in svg

Gigabyte GA-Z77P-D3, Руководство пользователя, Страница: 19 / 100

Поделиться
Скачать
Gigabyte GA-Z77P-D3 Скачать руководство пользователя страница 19

- 19 -

Hardware Installation

1-6  Back Panel Connectors

PS/2 Keyboard and PS/2 Mouse Port

Use the upper port (green) to connect a PS/2 mouse and the lower port (purple) to connect a PS/2 
keyboard.

Serial Port

Use the serial port to connect devices such as a mouse, modem or other peripherals.

HDMI Port

HDMI (High-Definition Multimedia Interface) is an all-digital audio/video interface capable of transmitting 

uncompressed audio/video signals. The HDMI port is HDCP compliant and supports Dolby TrueHD and 
DTS HDMaster Audio formats. It also supports up to 192KHz/24bit 8-channel LPCM audio output. You can 
use this port to connect your HDMI-supported monitor. The maximum supported resolution is 1920x1200, 
but the actual resolutions supported are dependent on the monitor being used.

In Windows 7, select Start>Control Panel>Hardware and 
Sound>Sound>Playback, set Intel(R) Display Audio to the 
default playback device.

USB 2.0/1.1 Port

The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices such as a USB 
keyboard/mouse, USB printer, USB flash drive and etc.

USB 3.0/2.0 Port

The USB 3.0 port supports the USB 3.0 specification and is compatible to the USB 2.0/1.1 specification. 
Use this port for USB devices such as a USB keyboard/mouse, USB printer, USB flash drive and etc.

When removing the cable connected to a back panel connector, first remove the cable from your 

 

•

device and then remove it from the motherboard.
When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent 

 

•

an electrical short inside the cable connector.

After installing the HDMI device, make sure to set the default sound playback device to HDMI. 

(The item name may differ depending on your operating system. The screenshot below is from 

Windows 7.)

Содержание GA-Z77P-D3





































































































Отзывы:

Нет отзывов