Gigabyte GA-X99-UD4P Скачать руководство пользователя страница 10

Страница: 10 / 128

- 10 -

Hardware Installation

1-2 Product Specifications

CPU

Support for Intel

Core

™

i7 processors in the LGA2011-3 package

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset

Intel

X99 Express Chipset

Memory

8 x DDR4 DIMM sockets supporting up to 64 GB of system memory

* Due to a Windows 32-bit operating system limitation, when more than 4 GB of

physical memory is installed, the actual memory size displayed will be less than

the size of the physical memory installed.

4 channel memory architecture

Support for DDR4 2133/1866/1600/1333 MHz memory modules

Support for non-ECC memory modules

Support for Extreme Memory Profile (XMP) memory modules

Support for RDIMM 1Rx8/2Rx8/1Rx4/2Rx4 memory modules (operate in non-

ECC mode)

(Go to GIGABYTE's website for the latest supported memory speeds and

memory modules.)

Audio

Realtek

ALC1150 codec

High Definition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN

Intel

GbE LAN chip (10/100/1000 Mbit)

Expansion Slots

2 x PCI Express x16 slots, running at x16 (PCIE_1, PCIE_2)

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIE_1 slot; if you are installing two PCI Express graphics

cards, it is recommended that you install them in the PCIE_1 and PCIE_2 slots.

2 x PCI Express x16 slots, running at x8 (PCIE_3, PCIE_4)

* The PCIE_4 slot shares bandwidth with the PCIE_1 slot. When the PCIE_4 slot is

populated, the PCIE_1 slot will operate at up to x8 mode.

* When an i7-5820K CPU is installed, the PCIE_2 slot operates at up to x8 mode and

the PCIE_3 operates at up to x4 mode.

(All PCI Express x16 slots conform to PCI Express 3.0 standard.)

3 x PCI Express x1 slots

(The PCI Express x1 slots conform to PCI Express 2.0 standard.)

1 x M.2 Socket 1 connector for the wireless communication module (M2_WIFI)

Multi-Graphics

Technology

Support for 4-Way/3-Way/2-Way AMD CrossFire

™

/NVIDIA

SLI

™

technology

* The 4-Way NVIDIA

SLI

™

configuration is not supported when an i7-5820K CPU is

installed. To set up a 3-Way SLI configuration, refer to "1-6 Setting up AMD CrossFire

™

NVIDIA

SLI

™

Configuration."

Storage Interface

Chipset:

- 1 x M.2 Socket 3 connector (M2_10G)

- 1 x SATA Express connector

- 6 x SATA 6Gb/s connectors (SATA3 0~5)

- Support for RAID 0, RAID 1, RAID 5, and RAID 10

* Only AHCI mode is supported when an M.2 PCIe SSD or a SATA Express device is

installed.

(M2_10G, SATA Express, and SATA3 4/5 connectors can only be used one at a

time. The SATA3 4/5 connectors will become unavailable when an M.2 SSD is

installed in the M2_10G connector.)

Содержание GA-X99-UD4P

































































































































Результаты поиска

Содержание GA-X99-UD4P

Отзывы:

Gigabyte GA-X99-UD4P, Руководство пользователя, Страница: 10 / 128

Результаты поиска

Содержание GA-X99-UD4P

Отзывы: