Gigabyte GA-PICO3350, Руководство пользователя

Страница: 17 / 29

- 17 -
2-3 Advanced
&
OnBoard LAN Controller
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled .
&
Soft-Off by PWR-BTTN
Configures the way to turn off the computer in MS-DOS mode using the power button.
Instant-Off Press the power button and then the system will be turned off instantly. (Default)
Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the power
button is pressed for less than 4 seconds, the system will enter suspend mode.
&
Primary Display
Specifies the first initiation of the monitor display from the installed PCI graphics card or the onboard
graphics.
IGD Sets the onboard graphics as the first display. (Default)
PCI Sets the graphics card on the PCI Slot as the first display.
&
PCIE VGA Workaround
Allows you to increase the compatibility of the PCI graphics card. (Default: Disabled)
&
LVDS Support
Enables or disables the LVDS function. (Default: Enabled)
&
LVDS Panel Resolution
Allows to you set LVDS resolution and bit rate. (Default: 1366x768 6-bit)
`
Realtek PCIe GBE Family Controller
This sub-menu provides information on LAN configuration and related configuration options.
`
Trusted Computing
Enables or disables Trusted Platform Module (TPM).
`
SIO Configuration
This section provides information on the super I/O chip and allows you to configure the parallel port.
Aptio Setup Utility - Copyright (C) 2019 American Megatrends, Inc.
Version 2.18.1263. Copyright (C) 2019 American Megatrends, Inc.
Main
OnBoard LAN Controller [Enabled]
Soft-Off by PWR-BTTN [Instant-off]
Primary Display [IGD]
PCIE VGA Workaround [Disabled]
LVDS Support [Enabled]
LVDS Panel Resolution [1366x768 6-bit]
`
Realtek PCIe GBE Family Controller (MAC:1C:1B:0D:E7:44:C8)
`
Trusted Computing
`
SIO Configuration
`
Hardware Monitor
`
SIO Misc Functions
`
CPU Configuration
`
Network Stack Configuration
`
CSM Configuration
`
USB Configuration
gf
: Select Screen
hi
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Advanced Boot Save & Exit Security