GA-N650SLI-DS4L Motherboard
- 76 -
B.
Configuring SATA controller mode in BIOS Setup
Make sure to configure the SATA controller mode correctly in system BIOS Setup.
Step 1:
Turn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-Test).
Under
Integrated Peripherals
, ensure
NV Serial-ATA Controller
is enabled. To enable all four SATA
3Gb/s connectors, set this item to
All Enabled
(Figure 1).
SATA-1
controls the SATAII0 and SATAII1
connectors only. To configure a RAID array, go to the
SATA-II RAID Config
submenu (Figure 2).
Figure 1
The BIOS Setup menus described in this section may differ from the exact settings for your
motherboard. The actual BIOS Setup menu options you will see shall depend on the motherboard
you have and the BIOS version.
Step 2:
Save changes and exit BIOS Setup.
Enable the SATA connectors with hard drives that you want to use for RAID. For example,
SATA-II 1
Primary RAID
is for the SATAII0 connector and
SATA-II 1 Secondary RAID
for the SATAII1 connector
(Figure 2).
Figure 2
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Integrated Peripherals
`
SATA-II RAID Config
[Press Enter]
On-Chip IDE Channel0
[Enabled]
IDE DMA transfer access
[Enabled]
On-Chip MAC Lan
[Auto]
Onboard LAN Boot ROM
[Disabled]
NV Serial-ATA Controller
[All Enabled]
IDE Prefetch Mode
[Enabled]
On-Chip USB
[V1.1+V2.0]
USB Keyboard Support
[Disabled]
USB Mouse Support
[Disabled]
Onboard Audio Function
[Auto]
`
SMART LAN
[Press Enter]
Legacy USB storage detect
[Enabled]
Onboard Serial Port 1
[3F8/IRQ4]
Onboard Parallel Port
[378/IRQ7]
Parallel Port Mode
[SPP]
x ECP Mode Use DMA
3
Item Help
Menu Level
`
KLJI
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
SATA-II RAID Config
Item Help
Menu Level
`
SATA-II RAID function
[Enabled]
SATA-II 1 Primary RAID
[Enabled]
SATA-II 1 Secondary RAID
[Enabled]
SATA-II 2 Primary RAID
[Disabled]
SATA-II 2 Secondary RAID
[Disabled]
KLJI
: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F5: Previous Values
F6: Fail-Safe Defaults
F7: Optimized Defaults
Содержание GA-N650SLI-DS4L
