Gigabyte GA-MA790XT-UD4P, Руководство пользователя, Страница: 92 / 112

GA-MA790XT-UD4P Motherboard - 92 -
Rebuilding an Array:
Rebuilding is the process of restoring data to a hard drive from other drives in the array. Rebuilding
applies only to fault-tolerant arrays such as RAID 1, RAID 5, or RAID 10 arrays. To replace the old
drive, make sure to use a new drive of equal or greater capacity. The procedures below assume a
new drive is added to replace a failed drive to rebuild a RAID 1 array.
•
AMD SB750 SATA controller:
While in the operating system, make sure the chipset drivers and
ATi SB700/750 RAID Utility
have
been installed from the motherboard driver disk. Then launch the
AMD RAIDXpert
from
All Programs
in the
Start Menu
.
Step 1:
Enter the login ID and password
(default:"admin"),
and then click
Sign in
to launch
AMD RAIDXpert
.
Step 2:
Select the RAID array to be rebuilt under
Logical
Drive View
and click the
Rebuild
tab in the
Logical Drive Information
pane.
Step 3:
Select one available drive and click
Start Now
to start the rebuilding process.
Step 4:
The rebuilding progress is displayed on the
screen and you can select
Pause/Resume/
Abort/Restart
during the rebuilding process.
Step 5:
When done, the array's status on the
Information
page
in the
Logical Drive Information
pane will display as
Functional
.