Gigabyte GA-MA790X-DS4 Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 100

Gigabyte GA-MA790X-DS4 Скачать руководство пользователя страница 67

Unique Features

- 67 -

B. Updating the BIOS

When updating the BIOS, choose the location where the BIOS file is saved. The follow procedure
assumes that you save the BIOS file to a floppy disk.

Step 1:
1. Insert the floppy disk containing the BIOS file into the floppy disk drive. In the main menu of

Q-Flash, use the up or down arrow key to select

Update BIOS from Drive

and press <Enter>.

•

The

Save Main BIOS to Drive

option allows you to save the current BIOS file.

•

Q-Flash only supports USB flash drive or hard drives using FAT32/16/12 file system.

•

If the BIOS update file is saved to a hard drive in RAID/AHCI mode or a hard drive
attached to an independent IDE/SATA controller, use the <End> key during the POST to
access Q-Flash.

2. Select

Floppy A

and press <Enter>.

Q-Flash Utility v2.02

Flash Type/Size.................................MXIC 25L4005

512K

Keep DMI Data Enable
Update BIOS from Drive

Save BIOS to Drive

Enter : Run

KL

:Move ESC:Reset F10:Power Off

0 file(s) found

Floppy A

<Drive>

HDD 0-0

<Drive>

Total size : 0

Free size : 0

3. Select the BIOS update file and press <Enter>.

Make sure the BIOS update file matches your motherboard model.

Step 2:
The process of the system reading the BIOS file from the floppy disk is displayed on the screen. When
the message "Are you sure to update BIOS?" appears, press <Enter> to begin the BIOS update. The
monitor will display the update process.

•

Do not turn off or restart the system when the system is reading/updating the BIOS.

•

Do not remove the floppy disk, USB flash drive, or hard drive when the system is
updating the BIOS.

Step 3:
When the update process is complete, press any key to return to the main menu.

Q-Flash Utility v2.02

Flash Type/Size.................................MXIC 25L4005

512K

Keep DMI Data

Enable

Update BIOS from Drive

Save BIOS to Drive

Enter : Run

KL

:Move ESC:Reset F10:Power Off

!! Copy BIOS completed - Pass !!

Please press any key to continue

Downloaded from

www.Manualslib.com

manuals search engine

«
...
65
66
67
68
69
...
»

Содержание GA-MA790X-DS4





































































































Отзывы:

Нет отзывов