Gigabyte GA-MA790GP-UD3H, Руководство пользователя, Страница: 39 / 104

- 39 - BIOS Setup
2-3 MB Intelligent Tweaker(M.I.T.)
(Note) This item is present only if you install a CPU that supports this feature.
•
Whether the system will work stably with the overclock/overvoltage settings you made is
dependent on your overall system configurations. Incorrectly doing overclock/overvoltage
may result in damage to CPU, chipset, or memory and reduce the useful life of these
components. This page is for advanced users only and we recommend you not to alter the
default settings to prevent system instability or other unexpected results. (Inadequately alter
ing the settings may result in system's failure to boot. If this occurs, clear the CMOS values
and reset the board to default values.)
•
When the System Voltage Optimized item blinks in red, it is recommended that you set
the System Voltage Control item to Auto to optimize the system voltage settings.
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
MB Intelligent Tweaker(M.I.T.)

Advanced Clock Calibratioin [Press Enter]
HT Link Frequency [Auto]
CPU Clock Ratio [Auto]
CPU North Bridge Freq.
(
Note
)
[Auto]
CPU Host Clock Control [Auto]
x CPU Frequency (MHz) 200
PCIE Clock (MHz) [Auto]
VGA Core Clock control [Disabled]
x VGA Core Clock (Mhz) 700
Set Memory Clock [Auto]
x Memory Clock x3.33 677Mhz
DCTs Mode (
Note
) [Unganged]

DRAM Configuration [Press Enter]
******** System Voltage Optimized ********
System Voltage Control [Manual]
SouthBridge Volt Control [Normal]
SidePort Mem Volt Control [Normal]
NorthBridge Volt Control [Normal]
DDR2 Voltage Control [Normal]

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level

CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
MB Intelligent Tweaker(M.I.T.)

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level

CPU NB VID Control
(
µù
)
[Normal]
CPU Voltage Control [Normal]
Normal CPU Vcore 1.3500V