Gigabyte GA-MA74GMT-S2 Скачать руководство пользователя

Страница: 19 / 100

- 19 -

Hardware Installation

1-6 Back Panel Connectors

USB 2.0/1.1Port

The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices such as a USB key

board/mouse, USB printer, USB flash drive and etc.

PS/2 Keyboard/Mouse Port

Use this port to connect a PS/2 keyboard or mouse.

D-Sub Port

The D-Sub port supports a 15-pin D-Sub connector. Connect a monitor that supports D-Sub connection
to this port.

DVI-D Port

(Note 1) (Note 2)

The DVI-D port supports DVI-D specifictation. Connect a monitor that supports DVI-D connection to this

port.

HDMI Port

(Note 2)

The HDMI (High-Definition Multimedia Interface) provides an all-digital audio/video interface to transmit the

uncompressed audio/video signals and is HDCP compliant. Connect the HDMI audio/video device to this port.
The HDMI Technology can support a maximum resolution of 1920x1080p but the actual resolutions supported
depend on the monitor being used.

Only for GA-MA74GM-S2H

• After installing the HDMI device, make sure the default device for sound playback is the HDMI

device. (The item name may differ from operating system. Refer to the figures below for details.),

and enter BIOS Setup, then set

Graphics Display Mode

D-SUB/HDMI

under

Advanced

BIOS Features

• Please note the HDMI audio output only supports AC3, DTS and 2-channel-LPCM formats. (AC3 and

DTS require the use of an external decoder for decoding.)

In Windows Vista, select Start>Control Panel>Sound,
select Realtek HDMI Output and then click Set Default.

(Note 1) The DVI-D port does not support D-Sub

connection by adapter.

(Note 2) Simultaneous output for DVI-D and HDMI is

not supported.

(Note 1) (Note 2)

(Note 2)

Содержание GA-MA74GMT-S2





































































































Результаты поиска

Содержание GA-MA74GMT-S2

Отзывы:

Похожие инструкции для GA-MA74GMT-S2

Бренды по названию

Популярные бренды

Gigabyte GA-MA74GMT-S2, Руководство пользователя

Результаты поиска

Содержание GA-MA74GMT-S2

Отзывы:

Похожие инструкции для GA-MA74GMT-S2

Бренды по названию

Популярные бренды