Gigabyte GA-K8VT800(Pro), Руководство пользователя, Страница: 28 / 112

- 28 - GA-K8VT800(Pro) Motherboard
English
(
j
)
For GA-K8VT800 Pro only
(
k
)
For GA-K8VT800 only
9) IDE3 / IDE4 (RAID/ATA133, Green Connector)
(
j
)
Important Notice: The red stripe of the ribbon cable must be the same side with the Pin1. If you wish
to use IDE3 and IDE4, please use it in unity with BIOS (either RAID or ATA133). Then, install the
correct driver to have proper operation. For details, please refer to the GigaRAID manual.
10) SATA0 / SATA1 (Serial ATA Connector)
You can connect the Serial ATA device to this connector, it provides you high speed transfer rates
(150MB/sec).If you wish to use SATA0 and SATA1, please Enable " OnChip Serial ATA " item.
Then, install the correct driver to have proper operation. For details, please refer to the
"VT8237_SATA_Manual.pdf" at "http:\\www.gigabyte.com.tw"
Pin No. Definition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
SATA1
7
1 39
2 40
IDE4
IDE3
1
SATA0
7 1
K8vt800pro_1001_q.p65
2003/8/26, ¤W¤È 11:55 28