Gigabyte GA-H97N Скачать руководство пользователя

Страница: 20 / 80

Hardware Installation

- 20 -

USB 3.0/2.0 Port

The USB 3.0 port supports the USB 3.0 specification and is compatible to the USB 2.0/1.1 specification.

Use this port for USB devices Use this port for USB devices such as a USB keyboard/mouse, USB printer,

USB flash drive and etc.

RJ-45 LAN Port (LAN1)

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describes the states of the LAN port LEDs.

Center/Subwoofer Speaker Out Jack (Orange)

Use this audio jack to connect center/subwoofer speakers in a 5.1/7.1-channel audio configuration.

Rear Speaker Out Jack (Black)

This jack can be used to connect front speakers in a 4/5.1/7.1-channel audio configuration.

Optical S/PDIF Out Connector

This connector provides digital audio out to an external audio system that supports digital optical audio.

Before using this feature, ensure that your audio system provides an optical digital audio in connector.

Line In Jack (Blue)

The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.

Line Out Jack (Green)

The line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be used to

connect front speakers in a 4/5.1/7.1-channel audio configuration.

Mic In Jack (Pink)

The Mic in jack. Microphones must be connected to this jack.

Triple-Display Configurations for the Onboard Graphics:

To set up a triple-display configuration, you must connect a D-Sub monitor using a DVI-to-D-Sub adapter.

Triple-display configurations are supported after you install motherboard drivers in OS. Only dual-display

configurations are supported during the BIOS Setup or POST process.

RJ-45 LAN Port (LAN2)

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describes the states of the LAN port LEDs.

Activity LED

Connection/

Speed LED

LAN Port

State

Description

Orange

1 Gbps data rate

Green

100 Mbps data rate

Off

10 Mbps data rate

Activity LED:

State

Description

Blinking

Data transmission or receiving is occurring

Off

No data transmission or receiving is occurring

Activity LED

Connection/

Speed LED

LAN Port

State

Description

Orange

1 Gbps data rate

Green

100 Mbps data rate

Off

10 Mbps data rate

Activity LED:

State

Description

Blinking

Data transmission or receiving is occurring

No data transmission or receiving is occurring

Содержание GA-H97N

















































































Результаты поиска

Содержание GA-H97N

Отзывы:

Похожие инструкции для GA-H97N

Бренды по названию

Популярные бренды

Gigabyte GA-H97N, Руководство пользователя

Результаты поиска

Содержание GA-H97N

Отзывы:

Похожие инструкции для GA-H97N

Бренды по названию

Популярные бренды