Gigabyte GA-H67N-USB3-B3 Скачать руководство пользователя

Страница: 30 / 100

BIOS Setup

- 30 -

2-1 Startup Screen

The following screens may appear when the computer boots.

A. The LOGO Screen (Default)

B. The POST Screen

Function Keys:
<TAB>: POST SCREEN

Press the <Tab> key to show the BIOS POST screen. To show the BIOS POST screen at system startup, refer to the

instructions on the

Full Screen LOGO Show

item on page 44.

<DEL>: BIOS SETUP\Q-FLASH

Press the <Delete> key to enter BIOS Setup or to access the Q-Flash utility in BIOS Setup.

<F9>: XPRESS RECOVERY2

If you have ever entered Xpress Recovery2 to back up hard drive data using the driver disk, the <F9> key can be used

for subsequent access to Xpress Recovery2 during the POST. For more information, refer to Chapter 4, "Xpress Recov-

ery2."

<F12>: BOOT MENU

Boot Menu allows you to set the first boot device without entering BIOS Setup. In Boot Menu, use the up arrow key

> or the down arrow key <

> to select the first boot device, then press <Enter> to accept. To exit Boot Menu, press

<Esc>. The system will directly boot from the device configured in Boot Menu.

Note: The setting in Boot Menu is effective for one time only. After system restart, the device boot order will still be

based on BIOS Setup settings. You can access Boot Menu again to change the first boot device setting as needed.

<END>: Q-FLASH

Press the <End> key to access the Q-Flash utility directly without having to enter BIOS Setup first.

Motherboard Model

BIOS Version

Award Modular BIOS v6.00PG

H67N-USB3-B3 F3a

<DEL>: BIOS Setup <F9>: XpressRecovery2 <F12>: Boot Menu <End>: Qflash

03/11/2011-H67-7A89UG0PC-00

Function Keys

SATA Mode Message:
"SATA is found running at IDE MODE!"

When the motherboard is set to its default values, the monitor will display a message during the POST, telling you the

SATA controller is running at IDE mode. The message that follows asks if you want to change it to AHCI mode and en-

able hot plug functionality for the SATA connectors.

Press <Y> to enable AHCI mode or <N> to continue IDE mode operation and stop showing this message again.

Note: This message will appear again at next boot if you do not respond YES or NO in time.

Function Keys

Содержание GA-H67N-USB3-B3





































































































Результаты поиска

Содержание GA-H67N-USB3-B3

Отзывы:

Похожие инструкции для GA-H67N-USB3-B3

Бренды по названию

Популярные бренды

Gigabyte GA-H67N-USB3-B3, Руководство пользователя

Результаты поиска

Содержание GA-H67N-USB3-B3

Отзывы:

Похожие инструкции для GA-H67N-USB3-B3

Бренды по названию

Популярные бренды