Gigabyte GA-H67M-D2-B3 страница 19 Скачать руководство пользователя

Страница: 19 / 100

- 19 -

Hardware Installation

1-6 Back Panel Connectors

PS/2 Keyboard and PS/2 Mouse Port

Use the upper port (green) to connect a PS/2 mouse and the lower port (purple) to connect a PS/2 keyboard.

D-Sub Port

The D-Sub port supports a 15-pin D-Sub connector. Connect a monitor that supports D-Sub connection
to this port.

DVI-D Port

(Note)

The DVI-D port conforms to the DVI-D specification and supports

a maximum resolution of 1920x1200 (the

actual resolutions supported depend on the monitor being used). Connect a monitor that supports DVI-D con-
nection to this port.

USB 2.0/1.1

The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices such as a USB key
board/mouse, USB printer, USB flash drive and etc.

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following de-
scribes the states of the LAN port LEDs.

(Note) The DVI-D port does not support D-Sub connection by adapter.

Activity LED:

State

Description

Blinking Data transmission or receiving is occurring
Off

No data transmission or receiving is occurring

Connection/Speed LED:

State

Description

Orange

1 Gbps data rate

Green

100 Mbps data rate

Off

10 Mbps data rate

Activity LED

Connection/

Speed LED

LAN Port

Line In Jack (Blue)

The default line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.

Line Out Jack (Green)

The default line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be

used to connect front speakers in a 4/5.1/7.1-channel audio configuration.

Mic In Jack (Pink)

The default Mic in jack. Microphones must be connected to this jack.

To configure 7.1-channel audio, you have to use an HD front panel audio module and enable

the multi-channel audio feature through the audio driver. Refer to the instructions on setting up a

2/4/5.1/7.1-channel audio configuration in Chapter 5, "Configuring 2/4/5.1/7.1-Channel Audio."

When removing the cable connected to a back panel connector, first remove the cable from

•

your device and then remove it from the motherboard.
When removing the cable, pull it straight out from the connector. Do not rock it side to side to

•

prevent an electrical short inside the cable connector.

Содержание GA-H67M-D2-B3





































































































Результаты поиска

Содержание GA-H67M-D2-B3

Отзывы:

Похожие инструкции для GA-H67M-D2-B3

Бренды по названию

Популярные бренды

Gigabyte GA-H67M-D2-B3, Руководство пользователя

Результаты поиска

Содержание GA-H67M-D2-B3

Отзывы:

Похожие инструкции для GA-H67M-D2-B3

Бренды по названию

Популярные бренды