&
Platform Power Management
Enables or disables the Active State Power Management function (ASPM). (Default: Disabled)
&
PEG ASPM
Allows you to configure the ASPM mode for the device connected to the CPU PEG bus. This item is
configurable only when
Platform Power Management
is set to
Enabled
. (Default: Disabled)
&
PCH ASPM
Allows you to configure the ASPM mode for the device connected to Chipset's PCI Express bus. This item
is configurable only when
Platform Power Management
is set to
Enabled
. (Default: Disabled)
&
DMI ASPM
Allows you to configure the ASPM mode for both CPU side and Chipset side of the DMI link. This item is
configurable only when
Platform Power Management
is set to
Enabled
. (Default: Disabled)
&
AC BACK
Determines the state of the system after the return of power from an AC power loss.
Memory
The system returns to its last known awake state upon the return of the AC power.
Always On
The system is turned on upon the return of the AC power.
Always Off
The system stays off upon the return of the AC power. (Default)
&
ErP
Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled)
Note: When this item is set to
Enabled
, the following functions will become unavailable: Resume by Alarm,
power on by mouse, and power on by keyboard.
&
Soft-Off by PWR-BTTN
Configures the way to turn off the computer in MS-DOS mode using the power button.
Instant-Off
Press the power button and then the system will be turned off instantly. (Default)
Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the power
button is pressed for less than 4 seconds, the system will enter suspend mode.
2-7 Power
- 33 -
