Gigabyte GA-G41M-Combo Скачать руководство пользователя страница 73

Страница: 73 / 88

- 73 -

Appendix

5-1-1 Configuring 2/4/5.1-Channel Audio

The motherboard provides three audio jacks on the back panel
which support 2/4/5.1

(Note)

-channel audio. The picture to the right

shows the default audio jack assignments.

5-1 Configuring Audio Input and Output

High Definition Audio (HD Audio)

HD Audio includes multiple high quality digital-to-analog converters (DACs) that support 44.1KHz/48KHz/
96KHz/192KHz sampling rate.

A. Configuring Speakers

(The following instructions use Windows Vista as the example operating system.)

•

To install a microphone, connect your microphone to the Mic in jack and manually configure the

jack for microphone functionality.

•

Audio signals will be present on both of the front and back panel audio connections simultane-
ously.

Step 1:
After installing the audio driver, the

VIA HD Audio Deck

icon

will appear in the notification area. Double-click

the icon to access the

VIA HD Audio Deck

(Note) 2/4/5.1-Channel Audio Configurations:

Refer to the following for multi-channel speaker configurations.

•

2-channel audio: Headphone or Line out.

•

4-channel audio: Front speaker out and Rear speaker out.

•

5.1-channel audio: Front speaker out, Rear speaker out, and Center/Subwoofer speaker out.

Chapter 5 Appendix

Line In

Front Speaker Out

Mic In

Содержание GA-G41M-Combo

























































































Результаты поиска

Содержание GA-G41M-Combo

Отзывы:

Gigabyte GA-G41M-Combo, Руководство пользователя, Страница: 73 / 88

Результаты поиска

Содержание GA-G41M-Combo

Отзывы: