Gigabyte GA-EX58-EXTREM, Руководство пользователя

Страница: 96 / 128

GA-EX58-EXTREME Motherboard - 96 -
Figure 2
Step 4:
After configuring the SATA ports, you are ready to proceed with the installation of the operating system.
You do not have to load the SATA controller driver during the installation process of the operating
system. Make sure to install the driver after the operating system is installed (using "Xpress Install" to
install all drivers required for your motherboard is recommended) for the SATA hard drives to work and
be detected properly.
Step 5:
Then install the Smart Backup utility from the Application Software menu on the driver Autorun screen
for monitoring the device/RAID status in the operating system (for more information, refer to section 5-
1-5, "Smart Backup Utility").
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
Smart Backup Config
Item Help
Menu Level

Smart Backup Config [Performance (RAID 0)]
Apply RAID Config [Press Enter]
=== Disk Info ===
[Port] [Model]
[Capacity]
Port 0 WDCWD800JD-00JNA0 80GB
Port 1 WDCWD800JD-22LSA0 80GB
=== RAID Info ===
[Level] [Capacity] [Member]
Performance 0GB

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults