Gigabyte GA-EP45T-DS3, Руководство пользователя

Страница: 96 / 116

GA-EP45T-DS3R/DS3 Motherboard - 96 -
B. Installing Windows Vista
(The procedure below assumes that only one RAID array exists in your system.)
Step 1:
Restart your system to boot from the Windows Vista setup disk and perform standard OS installation
steps. When a screen similar to that below appears, select
Load Driver . (Figure 6).
Step 2:
Specify the location where the driver is saved, such as your floppy disk or USB flash drive (Figure 7).
Figure 7
Figure 6