Gigabyte GA-970A-D3, Руководство пользователя

Страница: 71 / 88

- 71 - Appendix
A. Installing Windows 7/Vista
(The following instructions use Windows 7 as the example operating system.)
5-1-2 Installing the SATA RAID/AHCI Driver and Operating System
With the correct BIOS settings, you are ready to install Windows 7/Vista/XP.
Step 1:
You need to install the SATA RAID/AHCI driver during the OS installation. Use an alternative system to copy
the SATA RAID/AHCI driver from the motherboard driver disk to a USB flash drive. Copy the Hw7 folder under
BootDrv in the driver disk.
Step 2:
Boot from the Windows 7/Vista setup disk and perform standard OS installation steps. When the screen requesting
you to load the driver appears, select Browse .
Step 3:
Then browse to the USB flash drive and select the location of the driver. The locations of the drivers are as follows:
RAID driver for Windows 32-bit: Hw7\RAID\x86
RAID driver for Windows 64-bit: Hw7\RAID\x64
AHCI driver for Windows 32-bit: Hw7\AHCI\W7
AHCI driver for Windows 64-bit: Hw7\AHCI\W764A
Step 4:
When a screen as shown in Figure 1 appears, select AMD AHCI Compatible RAID Controller and click Next
to load the driver and continue the OS installation
Figure 1