Gigabyte GA-8TRS350MT, Руководство пользователя

Страница: 50 / 96

- 46 - GA-8TRS350MT Motherboard
English
Set Supervisor/User Password
When you select this function, the following message will appear at the center of the screen to assist
you in creating a password.
Type the password, up to eight characters, and press <Enter>. You will be asked to confirm the
password. Type the password again and press <Enter>. You may also press <Esc> to abort the
selection and not enter a password.
To disable password, just press <Enter> when you are prompted to enter password. A message
"PASSWORD DISABLED" will appear to confirm the password being disabled. Once the password is
disabled, the system will boot and you can enter Setup freely.
The BIOS Setup program allows you to specify two separate passwords:
SUPERVISOR PASSWORD and a USER PASSWORD
. When disabled, anyone may access
all BIOS Setup program function. When enabled, the Supervisor password is required for entering the
BIOS Setup program and having full configuration fields, the User password is required to access only
basic items.
If y ou select "System" at " Password Check" in A dvance BIOS Features Menu, you will be
prompted for the password every time the system is rebooted or any time you try to enter Setup Menu.
If you select "Setup" at "Password Check" in Advance BIOS Features Menu, you will be prompted
only when you try to enter Setup.
CMOS Setup Ut ility -Co py right (C) 1984 -2004 Aw ard Soft ware
}
Stan dard CM OS Feat ures
}
Advanced BI OS Feat ures
}
Inte grated Periphe rals
}
Powe r Manag em ent Setup
}
PnP/ PCI Con figurat ions
}
PC H ealth St atus
}
Frequ ency /Vol tage Con trol
ESC: Quit
higf
: Selec t Item
F8: Q- Flash F10: Save & Exit Setup
Chang e/Set/Dis able Pas sword
Top Perform ance
Load Fail-Sa fe Defa ults
Load Optim ized Defa ults
Set Supervis or Pass word
Set U ser Pass word
Save & Exit Setup
Exit Without Saving
Ente r Passw ord: